Number of views：217 Date：2024-09-29
With the rapid development of the pig farming industry, traditional captive farming has gradually been eliminated, and many large-scale farms have begun to use automated pig farming equipment for pig farming. Automated pig farming equipment has driven the development of productivity and promoted the scale of the pig farming industry. There are many types of pig farming equipment, and automatic water dispensers are one of them. There are two types of automatic water dispensers, what are the differences between these two types? Below, the editor will briefly share with you, hoping to be helpful to everyone.
The biggest feature of the nipple type automatic water dispenser for pigs is its simple structure, consisting of three major parts: the shell, the top rod, and the steel ball. When pigs drink water, they lift the top rod, and water flows out from the gap between the steel ball, top rod, and shell into the pig's mouth; After loosening its mouth, the pig relies on water pressure and the gravity of the steel ball and top rod to make the steel ball and top rod fall into close contact with the shell, and the water stops flowing out. This type of water dispenser has a strong ability to pass through impurities such as sediment, but it has poor sealing and needs to be used under reduced pressure. Otherwise, if the water flows too quickly, not only will it be difficult for pigs to drink water, but the water will also splash, waste water, and wet the pigsty. When installing a nipple type water dispenser, it should generally be inclined at a 45 ° -75 ° angle to the ground, with a ground clearance of 25-30cm for piglets, 50-60cm for growing pigs (3-6 months old), and 75-85cm for adult pigs.
Automatic water dispensers for duck billed pigs generally come in two sizes: small ones such as 9SZY2.5 (flow rate 2-3L/min), large ones such as 9SZY3 (flow rate 3-4L/min), small ones for suckling pigs and piglets, and large ones for medium and large pigs. There are two angles for installing this type of water dispenser: horizontal and 45 °. The height above the ground varies with the weight of the pig, and the water dispenser should be installed in the defecation area away from the pig's resting area. Regularly check the working condition of the water dispenser, remove dirt, adjust and tighten screws, and replace parts promptly if any faults are found.
The above is the content shared by the editor today. If you want to learn more about pig farming equipment, please continue to follow our website or call for consultation.
